how to install decorative wall molding

Best answer

Cut the pieces to the right size. Make sure all of your pieces are cut to the correct size. …Locate and mark your studs. It’s best to nail molding into a stud (the internal,wooden support structure in your walls).Glue the edges. When placing molding,you want to first glue the edges that will be making contact with the wall or ceiling.Place the piece. Once you’ve added your glue,put the piece in places and adjust it until it fits snugly.Nail it in place. With the molding fit into place,put a nail (add the thickness of the molding plus the drywall and a 1/2 for the stud to …Do finishing touches. Use a nail setter to push in nails which are tool exposed. …

People also ask

  • How do you install molding on a wall?

  • To install molding, start by cutting the pieces to the right size. Next, locate and mark studs as it鈥檚 best to nail molding into a support structure. When placing the molding, first glue the edges that make contact with the wall or ceiling, then nail the molding into the stud.

  • How to add molding squares to a wall?

  • How to Add Molding Squares to a Wall. 1 Step 1: Determine Your Layout. You can put as many trim boxes on a wall as you’d like, but a general rule is to keep each box around 2 to 4 feet in … 2 Step 2: Mark the Corners. 3 Step 3: Install the First Trim Piece. 4 Step 4: Install the Side Pieces. 5 Step 5: Install the Bottom Piece. More items

  • How do you measure a wall for baseboard molding?

  • Using a tape measure and a pencil, mark the wall at 3 1/2 inches from the top of the baseboard molding, near the corners of the wall. Make a similar mark 3 1/2 inches down from the bottom of the chair rail molding.

  • How do you finish the edges of wall molding?

  • Finishing Once the wall molding is installed, you鈥檒l need to caulk around the inside and outside edges of the unfinished molding strips where they meet the wall to cover the gaps. Using a caulking gun makes this job much easier! If necessary, smooth lightly with your fingertip.

    Leave a Reply

    Your email address will not be published. Required fields are marked *